Course Content
Section 1 – Introduction and Overview
You don't currently have access to this content
3 Topics
Learning Objectives
You don't currently have access to this content
Key Points
You don't currently have access to this content
What is Grinding?
You don't currently have access to this content
Section 2 – A look at the Machines: Von Arx and Graco
You don't currently have access to this content
2 Topics
Von Arx – Model VA25s
You don't currently have access to this content
Graco GrindLazers – Models 390 & 630
You don't currently have access to this content
Section 3 – Pre-Trip and Inspection
You don't currently have access to this content
4 Topics
Video – Von Arx – Water Flow Dust Suppression Check
You don't currently have access to this content
Pre-Operation Checklist
You don't currently have access to this content
CAUTION – Von Arx Backward Tilt
You don't currently have access to this content
Cutters – Use, Inspection, and Care
You don't currently have access to this content
Section 4 – Standard Operating Procedure
You don't currently have access to this content
3 Topics
Pressure – Avoiding Surface Damage
You don't currently have access to this content
Video: Operating the Von Arx Scarifier
You don't currently have access to this content
Videos: Operating the Graco GrindLazer (390 & 630) Parts 1-5
You don't currently have access to this content
Section 5 – Maintenance and Service
You don't currently have access to this content
3 Topics
Daily Maintenance
You don't currently have access to this content
Operator Cautions
You don't currently have access to this content
Securing and Servicing
You don't currently have access to this content
Section 6 – Troubleshooting
You don't currently have access to this content
1 Topic
Starting, Grinding, Grind Head
You don't currently have access to this content
Final Quiz
Scarifiers – Final Test
You don't currently have access to this content