In Cab Inspection
Open to access this contentLesson
Open to access this contentAir Brakes Test
Open to access this contentWalk Around Inspection
Open to access this contentTake it from Jesse
Open to access this contentSecuring the Attenuator, Cones, and Cab
Open to access this contentSecuring Loads on a Rack Body
Open to access this contentThree Seconds for Safety
Open to access this contentTroubleshooting
Open to access this contentMaintenance
Open to access this content
Pre-Shoot: Carriage Inspections and Dog House Ready
When Striping
Click Here to Listen https://safetymarking.net/wp-content/uploads/2021/01/Intro.wav IMPORTANT FOR SHOOTER: heat should be shut off 1,000 feet prior to the end of shooting so that the hot material is dispersed completely from the...What You Must Know and Do
Checking Tank Levels – Paint and Beads
Tank Safety Parts 1-3: Dipping Tanks on the...Standard Operating Procedure (SOP)
Course Overview

Safety: Releasing Bead Tank Pressure
Open to access this contentVideos: Post Stripe – Shut Down
Post Stripe: Shut Down Rear Console Shut Down: Manifold to Pony...Troubleshooting
Open to access this contentWhen Striping
Open to access this contentPaint and Heating (Glycol) Systems Flow Chart
MRL trucks have a recirculation pump. MB trucks DO...Standard Operating Procedure (SOP)
Pre-Trip
Click Here to Listen https://safetymarking.net/wp-content/uploads/Pre-Trip.wav Pre-Trip 1. Pre-Trip truck: check running gear, lights, wheels, and check on and Off Road fuel tanks. 2. Check material sheet on clipboard in cab to make sure you have enough material for...Introduction and Learning Objectives
Notes & Tips
Click Here to Listen...Videos 1-8: Service – Step-by-Step Pump Rebuild
Troubleshooting – Eight (8) Common Issues
1. Machine Won’t Start Click Here to Listen https://safetymarking.net/wp-content/uploads/Graco-200-Ts-Machine-wont-start.wav 2. Pump Won’t Turn On Click Here to Listen https://safetymarking.net/wp-content/uploads/Graco-200-Ts-wont-turn-on.wav 3. Pump...
Videos 1-5: Pre-Stripe Machine Inspection
Watch all five videos below to learn the basics of the Graco HS200 Paint Machine with Pressurized Bead Sytem...Step by Step – Loading and Flushing Machine
Click Here to Listen...Daily Maintenance
Click Here to Listen...Graco 200HS Safety Precautions
Click Here to Listen...Key Components
Section 10 – Lift Crane Truck: G-17
Open to access this contentSection 11 – Troubleshooting
Open to access this contentWhat Successful Operators Do
ALWAYS think of safety and how to prevent what can go wrong Complete daily maintenance before and after the shift Work as role models for everyone around them Teach others the correct way to do things Treat the equipment as if they owned it Represent SMC in the best...Section 9 – Dual Carriage Trucks: G-16 & G-18
Section 8 – Changing Grind Heads (videos 4, 5, & 6)
Open to access this contentSection 6 – Operator Safety
Open to access this contentSection 7 – Standard Operating Procedures (SOPs)
Open to access this contentSection 5 – Maintenance Checklist, Heads, Cutters, and Shafts (video 3)
Section 4 – Maintenance and Inspection Forms
Section 3 – Pre-Inspection (video 1) and Start-Up (video 2)
Watch the videos below and take the quiz after each...