Course Learning List
Quick Hit – Seatbelts Save Lives
Specialty: Graco TapeLazer™ HP Automatic
#09 Qual: Epoxy – Impingement
TEXA IDC5 – Navigating and Using the Site
Competencies in Action – Organizational Saavy
Competencies in Action – Demonstrates Self-Awareness
#19 Qual: ODRA Sweeper
ODRA Sweeper – Maintenance Overview
2024-20 Qual: Thermoplastic
Quick Hit: Tailgating / Following Too Close
Quick Hit: Load Securement – Rack Bodies and Attenuators
JiT: Hand Grinder
CDL Test Prep
Legacy Tablet Work Order
Giving and Receiving Effective Feedback
Truck Safety: Moving, and Working Under or On
Quick Hit: Strap Safety
Using the Skip Line SC-12 Control Box
Test Course #1
Fleetio – Procedure Quick Hits
Hydro Fill Station Procedure
Quick Hit – Grinding Dump Procedure
JiT: Grinding Trucks
JiT: Rumble Hog
JiT: Graco Airless Paint Machines
JiT: MRL Paint
JiT: Hydroblaster
2024-01 Safety: Forklift
Introduction to Online Learning at Safety Marking
#01 Qual: Surface Preparation with Scarifiers
Competencies – An Introduction
This course explains the what, where, and how of the competencies that we use at Safety Marking.
2024-02 Qual: Single Operator Grinding
This course presents the full version of Single Operation Grinding training. There is a final test. This is one part of the Qualification Process along with logging hours and passing the Job Performance Measure. The course should not take more than two (2) hrs. to complete.
Competencies In Action – Decision Quality
#02 Safety: Work Zone Safety (WZS)
#03 Safety: Fleet Safety
Competencies In Action – Instills Trust
2024-03 Qual: Graco Airless Paint Machines
#04 Safety: CT State Police Truck Inspections
2024-04 Qual: M-B Paint Trucks
This course is part of the qualification process for shooting/driving/maintaining an MB Paint Truck. Other related videos include: Commercial Truck Inspections, Bead Tank Pressure Release, Accumulators,
Understanding Carbide Seat Pump Damage, Furnaces, and Bead Gun Calibration. You must pass the course test and the Job Performance Measure (JPM) once your hours are completely logged and a Foreman has signed-off to verify completion.
2024-05 Qual: MRL Paint Trucks
#06 Qual: Epoxy Detail – MB Truck
JiT: MB Paint
#07 Qual: Epoxy – Cleaning and Rebuilding Pumps
SMC INC. 8/2021 ALL RIGHTS RESERVED.
#07 Safety: Loading Totes and Beads
#08 Safety: Spill Response-Tote Rupture
#08 Qual: Epoxy – Static Mix
#14-Qual: Bead Gun Calibration
#09 Safety: Spill Response-Contain & Clean
#10 Safety: Bead Tank Pressure Release
#10 Qual: Carbide Pump Seat Damage
Video Learning List
Quick Hit – Seatbelts Save Lives
Specialty: Graco TapeLazer™ HP Automatic
#09 Qual: Epoxy – Impingement
TEXA IDC5 – Navigating and Using the Site
Competencies in Action – Organizational Saavy
Competencies in Action – Demonstrates Self-Awareness
#19 Qual: ODRA Sweeper
ODRA Sweeper – Maintenance Overview
2024-20 Qual: Thermoplastic
Quick Hit: Tailgating / Following Too Close
Quick Hit: Load Securement – Rack Bodies and Attenuators
JiT: Hand Grinder
CDL Test Prep
Legacy Tablet Work Order
Giving and Receiving Effective Feedback
Truck Safety: Moving, and Working Under or On
Quick Hit: Strap Safety
Using the Skip Line SC-12 Control Box
Test Course #1
Fleetio – Procedure Quick Hits
Hydro Fill Station Procedure
Quick Hit – Grinding Dump Procedure
JiT: Grinding Trucks
JiT: Rumble Hog
JiT: Graco Airless Paint Machines
JiT: MRL Paint
JiT: Hydroblaster
2024-01 Safety: Forklift
Introduction to Online Learning at Safety Marking
#01 Qual: Surface Preparation with Scarifiers
Competencies – An Introduction
This course explains the what, where, and how of the competencies that we use at Safety Marking.
2024-02 Qual: Single Operator Grinding
This course presents the full version of Single Operation Grinding training. There is a final test. This is one part of the Qualification Process along with logging hours and passing the Job Performance Measure. The course should not take more than two (2) hrs. to complete.
Competencies In Action – Decision Quality
#02 Safety: Work Zone Safety (WZS)
#03 Safety: Fleet Safety
Competencies In Action – Instills Trust
2024-03 Qual: Graco Airless Paint Machines
#04 Safety: CT State Police Truck Inspections
2024-04 Qual: M-B Paint Trucks
This course is part of the qualification process for shooting/driving/maintaining an MB Paint Truck. Other related videos include: Commercial Truck Inspections, Bead Tank Pressure Release, Accumulators,
Understanding Carbide Seat Pump Damage, Furnaces, and Bead Gun Calibration. You must pass the course test and the Job Performance Measure (JPM) once your hours are completely logged and a Foreman has signed-off to verify completion.
2024-05 Qual: MRL Paint Trucks
#06 Qual: Epoxy Detail – MB Truck
JiT: MB Paint
#07 Qual: Epoxy – Cleaning and Rebuilding Pumps
SMC INC. 8/2021 ALL RIGHTS RESERVED.